| |
|
 |
 |
| |
|
The E460 is a 32-bit
1/10Mbps PCI home networking adapter, which supports the
traditional Ethernet and innovative in-house phone-line
connection. The auto-detection feature allows user choose
the network speed without any software configuration.
The 1Mbps home networking connection build up the in-house
network through the existing telephone twisted-pair line
without any cabling issue |
|
|
| |
 |
|
| |
|
How to use
|
|
| |
|
|
Within one home
network segment, there are 25 nodes could attach to network
by
daisy-chain topology.
Meanwhile, the maximum network extended length is 500 feet.
The adapter supports the most popular PC operating systems and
also is designed
with bus-master architecture to optimize the bus throughput.
|
|
| |
|
|
| |
|
Specialty |
|
| |
|
|
-
Contains Standard Ethernet IEEE802.3.
- Compliant with 1Mbps HomePNA specification 1.0
- Compliant with PCI Local Bus revision 2.0/2.1 specifications
- Automatically network speed detection between 1Mbps and 10Mbps
- Automatic partition of faulty ports to isolate the network
failure
- Supports rich diagnostic LED indicators
- Supports popular PC network operating systems
- FCC Class B, CE certification
|
|
| |
|
|
| |
|
Spec List |
|
| |
|
|
Standard
|
IEEE802.3, 10BASE-T standard
HomePNA 1.0 specifications |
Interface
|
One RJ-45 connector for Ethernet connection
Two RJ-11 phone-jack for Home Networking |
| Cable Connection |
RJ-45 (10BASE-T): UTP Category 3,
4, 5
RJ-11 (HomeNet): Twisted-Pair phone line |
| Base I/O Addresses |
Assigned by BIOS |
| Bus Interface� |
32-bit bus master |
Hardware Interrupt
|
PCI INTA |
| Emission |
FCC Class A, CE |
| LED indicator |
Port : Speed, Link/Activity |
| Operating Temperature |
0~55¡É(32-131¡ÆF) |
| Operating Humidity |
10% ~ 90% (non-condensing) |
|
|
| |
|
|
| |
|
Application of Network |
|
| |
|
|
 |
|
